Payment & Shipping Terms:
ASTM A252 GR3 BORUN Structural Spiral Welded Piling pile pipes
Deep foundations are required when the shallow soils are not strong enough to support the loads from the structure. Pipe piles are commonly used in deep foundations and transfer the loads from building to stronger soil layers found deep underground. The loads are resisted through skin friction and point bearing. Pipe can be driven either open-ended or closed-ended, with points or plates. If driven with plates, the pipes can then be filled with concrete to add strength to the pile. Usually the money spent on plates, rebar, and concrete would be better spent on a larger, thicker pile. Pipe piles range in size from several inches to several feet in diameter and can be easily spliced to create piles hundreds of feet in length.
Specification & Details:
1 Outside Diameter: 219.1 mm - 2540mm (8"-100")
2 Wall Thickness: 6mm - 25.4mm Length: 6- 22 m
3 Standard: API 5L, API 5CT, GB/T9711.1, SY5037-2000, EN10025, EN10219, ASTM A252,
4 Steel Material: Q235A, Q235B, Q345, ASTM A53/106, A252A/B/C, API 5L GR.A/B, L245 L290 X42 X46 X70 X80, S355, S275 etc.
6 Surface Treatment:
|Single-Layer FBE Coating||SY/T 0315-2005, CAN/CSA Z245.20-2010,
DEP 220.127.116.11-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001
|Double-Layer FBE Coating||Q/CNPC 38-2002, CAN/CSA Z245.20-2010|
|2LPE/2LPP Coating||SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009|
|3LPE/3LPP Coating||SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010,
ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988
|Insulation Coating||SY/T 0415-1996, CJ/T 114-2000, EN 253-1994|
Single-Layer FBE Coating
Standard: API RP 5L2-2002, DEP 18.104.22.168-Gen-2005
7 Usage: Used for low pressure fluid delivery, such as water, gas, and oil; construction and piling, chemical industry, power plant, offshore platform etc.
8 Test: Chemical Component Analysis, Mechanical Properties (ultimate tensile strength, yield strength, percentage elongation), Technical Properties (flattening test, bending test, blow test, impact test, exterior size inspection, hydrostatic test, X-ray test)
9 Loading Port: mainly Tianjin port
10 Mill Test Certificate: as per standard
11 Payment Terms: TT, LC
13 Mini Order: 20tons for carbon steel, 30-50tons for low alloy steel